Wavlink 1200 or Wavlink AC1200 is a popular dual-band WiFi extender that can help amplify the existing internet signals to boost the network capabilities. Irrespective of the location it is installed, the extender works seamlessly to provide better connectivity and faster internet speeds on the go. If you have recently purchase one of these WiFi extenders, learning how to set it up becomes essential. This blog will walk you through the Wavlink 1200 setup process, along with information on how to install Wavlink AC1200 drivers on your computer. The blog will also cover details on steps to consider when troubleshooting general Wavlink 1200 extender issues.
Wavlink 1200 Extender Setup Configuration
When you unbox the extender, you will find the Wavlink AC1200 user manual. Using this very guide, you will find the essential information about the configuration and Wavlink AC1200 review as well. Along with these details, you will also find the login credentials- default web/IP address, username and the password for your disposal. You can go through the guide to collect all of this information and learn about the Wavlink 1200 Setup configuration.
Wavlink WiFi Extender Setup 1200- Process Instructions
Carrying out the Wavlink AC1200 setup process is essential, as it will ensure that you don’t face any issues with the network in the future. And to ensure that happens, you’ll need to keep a few Wavlink 1200 setup instructions in mind. These are:
- Ensure that all the Wavlink AC1200 repeater setup prerequisites are covered.
- Consult the Wavlink 1200 Extender manual, if you face any issues with the setup process. For expert assistance, you can get in touch with our team.
- If you get stuck anywhere during the setup process, don’t force your way through the setup, as it may end you up in even more trouble and cause more damage to the network.
- Even if the setup process gets tedious, try to stay as calm as possible. Make the wise decision to consult the experts at Techboy Solutions.
Adhering to these instructions strictly will ensure that you don’t face any issues during the setup and login process. Therefore, keep these things in mind before approaching the setup process.
Wavlink AC 1200 Dual Band Wifi Range Extender Manual
The Wavlink extender kit arrives with a manual or as we call it, a ‘Quick Installation Guide.’ This guide contains detailed steps for approaching the setup process, preparing for the same and instructions on how to proceed with the login part as well. Even if you face issues with the network setup, need help resetting the password details, this guide contains everything to help you with answers in detail.
Owing to the complex terminology used in the guide, some users might find it difficult to comprehend the details and end up falling into even more trouble. If you get stuck with how to install Wavlink AC1200, it is recommended that you reach out to the support team and consult them on the process.
In addition to this information, you’ll also find a description of the device including its specifications, the details related to the ports, power and headphone jacks, if any. The guide will also explain the setup process, the modes the device can be set up in, and how to proceed with the same. You will also find information on the firmware update process, troubleshooting general issues and how to connect to multiple devices using the app and the traditional setup process.
Wavlink 1200 Setup Instructions
Plug your extender into a power outlet in your home.- Connect your extender to your computer. Here are two approaches:
Wireless: Turn on your WiFi and search for the extender network SSID. Connect to it.
Wired: Connect your extender to your computer using a LAN cable.
- Open a web browser on your computer and type wifi.wavlink.com or use the default IP address 192.168.10.1 to access the web-based device management interface.
- Login to the same using the default Wavlink password i.e. ‘admin’.
- Select a default language to continue with the setup process. The very first step is setting up a new login password.
- Once done, you’ll need to select the mode you want to set up your extender in.
As a Repeater: Select this mode to extend your existing WiFi network. You can choose an upstream router and add it to the network manually or automatically.
As an Access Point: Select this mode to turn the extender into an access point. You can continue using the old SSID or even create a new one and set up a password.
Your Wifi extender is now ready to use. Connect to the new network using the credentials you set during the process.
Another, even convenient way to set up your WiFi extender is using the WPS buttons on your WiFi router and the extender. Refer to the Option II in the user manual for detailed instructions on how to do that.
FAQs
How to login to Wavlink AC 1200 repeater?
You can login to Wavlink AC1200 repeater using the default credentials. You will need to type in these credentials on the web based interface which you can access using the default IP address i.e. 192.168.10.1 or the web address www.wifi.wavlink.com. Once you have opened this interface on your computer, type in the default credentials in their respective fields and click on the Login button.
What are the steps for Wavlink WiFi Extender Setup 1200 through mobile?
You can set up your Wavlink AC1200 extender using your mobile device easily. Here are some steps to follow:
- Connect your mobile device to the extender’s network SSID using the default password details.
- Open a web browser and type 192.168.10.1 into the address bar.
- When the web-based interface appears on-screen, type in the default login credentials including the username and the password. Tap on the Login button and you will be signed in to the Wavlink 1200 setup interface.
- Select the region you are in and add a new default password, if you want.
- Select the appropriate mode you wish to set up your repeater in and then connect to the main router you want to extend the signals from.
- Follow the on-screen steps to complete the configuration process and finally tap on the Save button. This will ensure that the settings are applied.
- If prompted, restart your extender and then connect your devices to the new network. You can now start using the internet using your WiFi extender.
What to do if my Wavlink AC1200 extender password does not work?
It could likely be due to a misspelling in the password you enter. Or, you might have entered the characters in the wrong case accidentally. Recheck the password and try again. If the password still doesn’t work, you’ll need to change it using the web-based interface. Login to the same and edit the details. Make sure you save the changes before you continue. This will ensure that the new password takes effect and you can connect your devices easily.
The Final Word
The Wavlink AC1200 extender is a great extender device you can use to set your home network up. It can help boost your internet connection to a great extent, all the while maintaining top-notch data security. If you are looking for information on Wavlink 1200 setup, this blog has all the information you will need. For more help on the same, you can always reach out to our team.