Wavlink WiFi range extenders have been around for a while now, yet users remain clueless about the setup and installation process. Knowing how to install Wavlink WiFi Extender becomes important, if you want to ensure seamless internet connectivity at all times. Before you set things up, it is essential to know that most Wavlink outdoor WiFi range extenders support working in AP mode and the Repeater mode. This blog will walk you through the steps on the Wavlink WiFi Repeater installation process, so you can enjoy internet connectivity around your property.
Things to Know for Wavlink Installation
As mentioned, you can configure your Wavlink WiFi Extender in two different modes, namely- repeater mode and AP mode. If you configure the extender in repeater mode, the WiFi SSID will change from Wavlink-XXXX by default to the same SSID_ext2.4G or _ext5G as the host router’s WiFi signal. This means that if the network SSID of the host router is MyHome, the extender WiFi signal SSID will change to MyHome_EXT2.4 or MyHome-5G, automatically. The WiFi password of the extender can be set the same as your main router WiFi.
When you wish to configure your extender in AP mode, you’ll need to connect your extender to the main front-end router using an ethernet cable. This will ensure that the network speed is maintained and physical interference is avoided as much as possible.
Wavlink WiFi Repeater Installation Process
In Repeater Mode
To start with the Wavlink WiFi Extender Installation process, here are some steps you can follow:
- Connect the ‘PoE In’ port of the extender unit to the PoE port on the converter using an ethernet cable.
- Plug the power adapter of the extender to the wall socket.
- Power on the extender.
- Open the WLAN on your smartphone and look for the extender network SSID. Connect to the same once you see the same on the screen.
- Now, open a web browser and type the default IP address 192.168.10.1 or http://waplogin.link in the browser URL bar. Hit enter and then the login screen will appear.
- Enter the default login password “admin” to login to the web based device management wizard. From the wizard, choose the right language and then click on the Login button.
- Once you are logged into the device management wizard, you will see a new webpage asking you to configure the hardware default settings.
- Choose Bridge or Gateway in the repeater mode wizard and then select the wireless network that you want to connect.
- After you select a wireless network, you will see a default repeater SSID, select it and change the SSID name to avoid repetition. The password must be set to the same details as the WiFi you connected to.
In AP Mode
To configure your WiFi extender in AP mode, you will need to connect your WiFi extender to the main router using an ethernet cable. This will ensure that the network speed is maintained and little to no signal interference conditions can be maintained. Here are some steps on how to install Wavlink WiFi Extender in the AP mode:
- Connect an ethernet cable between the PoE In port on the router and the Wavlink extender device. Next, connect the LAN Data in port to the LAN port of your router and modem.
- Now, plug the power adapter to a wall socket and power on the extender.
- Find the Wavlink extender’s WiFi SSID on your device and connect to it wirelessly.
- Type in the default IP address 192.168.10.1 or the web address http://waplogin.link in the URL bar of the web browser and hit enter.
- On the login screen you see online, type in the default password details i.e. ‘admin’ and hit login.
- Once you are logged in, click on the ‘AP’ button and then complete the settings such as SSID and WiFi name and password. After these are edited, click on the ‘Apply’ button.
- Go back to the WLAN menu on your computer and reconnect to the WiFi SSID. You can now start using the internet on your computer and any connected devices.
These steps complete the wavlink installation process.
FAQs
How to install Wavlink WiFi Extender?
You can install the Wavlink WiFi extender easily using some simple steps. These are-
- Connect to the extender’s default WiFi network using WiFi or a LAN cable.
- Open a browser and use the default WiFi login address 192.168.10.1 to access the login wizard.
- Login using the default username and password details.
- Choose the home WiFi network and enter its password in the setup wizard to complete the configuration process.
What if I am facing issues with Wavlink WiFi Repeater Installation?
If you face issues with WiFi repeater installation, here are some steps you can follow:
- Power cycle the extender.
- Check if the extender and the router are connected.
- See if you are using the internet within the extender’s signal range.
- Verify the extender settings by logging in to the web-based setup wizard.
- Change the wireless channel to a less-crowded one and try accessing the internet again.
- Upgrade the extender firmware and then see if the internet starts working again.
Why am I unable to login to Wavlink extender?
You may be unable to log into a Wavlink extender due to incorrect IP address, browser issues or problems with the network as well. To fix this issue ensure that there’s a stable physical connection between the devices.
- Try clearing the browser’s cache and a different browser to access the login page.
- See if the firewall or some ad blockers may be generating issues with the login process. Try a factory reset on your extender device.
- If you still face issues, you can reach out to the team at our end.
The Final Word
Wavlink WiFi Extender Setup process is easy and can be completed using the steps discussed in this article. Once you have set up the device, you can start accessing the internet across all corners of your home in a hassle-free manner. If you face issues with the setup process or still have questions about how to install wavlink wifi extender, our team of experts is there to help. Feel free to reach out with questions and get answers.