Is your Wavlink not connecting to the internet even after completing its set up properly? Don’t you just hate it when that happens? It’s even worse when you don’t know why your Wavlink fails to connect to the internet.
In this guide, we’ll try to make you understand why your Wavlink refused to connect to the internet. Not only that, but we’ll also cover troubleshooting methods to resolve the issue.
The troubleshooting steps will help you resolve the following reasons-
- Wavlink not connecting to the internet
- Unable to connect to the internet via Wavlink extender
- Connection issues with the Wavlink device
- Wavlink refused to connect to the internet
Wavlink Keeps Disconnecting: Know the Reason
Wavlink extender is not within the range of WiFi router
One of the main reasons why Wavlink not connecting to the internet is because too far from the WiFi router. Incorrect placement of wavlink device might result in internet connectivity issues.
Wavlink device is not receiving proper power
If your wavlink device is not receiving proper supply or is not connected to power it will give you an internet connectivity issue.
The firmware is outdated
Another reason why your Wavlink disconnects to the internet might be due to the outdated firmware. Corrupt or outdated firmware might result in wavlink internet connectivity issues.
Issue from the end of ISP
There is a possibility that there’s an issue from your ISP end due to which your Wavlink device keeps disconnecting from the internet.
How to Troubleshoot Wavlink Not Connecting to Internet?
Follow the below-given steps to troubleshoot the ‘Wavlink not connecting to internet’ issue-
Reboot the wavlink device
Technical difficulties could be the main factor preventing your Wavlink from connecting to the internet. It is advised that you fix these issues before they render your device entirely inoperable. There is no better solution than restarting the Wavlink device.
Here’s how to restart your Wavlink range extender:
- Turn off your Wavlink extender first.
- Remove the extender's plug from the corresponding electrical outlet.
- Give the device some time to rest.
- Finally, reconnect your Wavlink range extender to the wall socket and turn it on.
Check whether you are successful in connecting the extender to the internet after resetting it. Otherwise, keep reading.
Make sure your Wavlink extended is connected to the correct WiFi network
Your WiFi extender builds a new extended network for you when you connect it to your router. The name of the extended network is distinct from that of the previous network. You most likely have all of your devices connected to the old network rather than the new one. The enlarged network name can terminate in _ext if your home is equipped with a Wavlink Extender.
You might experience patchy wifi connectivity if you connect your devices to another wireless network. Therefore, make sure you’re connected to the proper WiFi network by checking twice.
Check the placement of the Wavlink device
The incorrect placement of the Wavlink device might be the reason why you’re getting the internet connectivity issue. Make sure you place the Wavlink device where there’s no or less interference.
Avoid placing your Wavlink device near corners or thick walls. You must also keep the wavlink device away from Bluetooth speakers, baby monitors, refrigerators, treadmills, microwave ovens, cellular phones, etc.
Large metal or fish tanks can also disrupt the Wi-Fi signals. Therefore, place your Wavlink device away from all such devices.
Contact your Internet Service Provider
Is the issue from your ISP end? If yes, then contact your ISP right away. sometimes, your Wavlink device disconnects to the Wi-Fi when it is receiving high-speed internet. This is due to an issue with your Internet Service Provider. Give them a call to get your issue resolved.
Reset the Wavlink device
If nothing is helping and your Wavlink is still not connecting to wifi then there are high chances that your device has encountered some technical issues. Most of the time, technical glitches can be resolved by performing a reset on your device.
Go through the following steps to reset your Wavlink device-
- Connect the Wavlink device to the power source.
- Locate the reset button on the Wavlink device.
- Take a sharp or pointed pin-like object.
- Press the ‘Reset’ button carefully for about 10 seconds.
- Wait for the internet and power LEDs to change the pattern.
That’s how you reset Wavlink to its original settings. This will resolve the technical glitch and you’ll be able to connect Wavlink to the internet
Final Words: Wavlink Not Connecting to the Internet
You can implement these steps if you’re encountering a ‘Wavlink not connecting to the internet issue. In case, you’re still encountering the issue even after trying all these troubleshooting steps then we recommend you to contact our technicians. Our experts will resolve the wavlink internet connectivity issue in minutes. Reach us via our toll-free number. You can even chat live with our technicians.